Ø Foot and Flange (Both B & C Type) Mounting with Double side Shaft Extension.
Ø Die Cast Aluminum Body from 63 Frame to 112 Frame and C.I Body from 132 Frame to 160 Frame.
Ø Stampings are made low loss high grade silicon steel.
Ø Windings are wound with polyester enameled ‘F’ class wire.
Ø Motors are designed for continuous duty at an ambient temp 40°C.
Ø All standard motors having Deep groove ball bearings are capable of taking loads in both directions.
SPECIFICATION FOR THREE PHASE STANDARD MOTORS:
| Ø Output |
: 0.09Kw to 15Kw |
| Ø Voltage |
: 415V & 220V ±5% |
| Ø Frequency |
: 50HZ & 60HZ ±5% |
| Ø Combined Variation |
: ±10% |
| Ø Ambient |
: 40°C |
| Ø Duty |
: S1 |
| Ø Insulation |
: Class ‘F’ |
| Ø Protection |
: Ip55 |
SINGLE PHASE MOTORS:-
Ø Single phase Motors types are CS&R (Capacitor Start and Run), CSCR (Capacitor Start and Capacitor
Run), CSIR (Capacitor Start Induction Run).
Ø Out put : 0.09Kw to 1.5Kw
Ø Voltage : 230V ± 10%
Ø Specially designed Centrifugal Switch for noise less and silver contacts to increase life of the switch.
Ø Special Shaft extension and double side shaft extension also given.
Ø All other specification are similar to standard Motors.
BRAKE MOTORS:
The brake motors are with new design, offerings better performance and light in weight. Before starting
the motor, the brake must be energized by applying 190Volts D.C to the Brake coil, the D.C supply to be cut
off only after switch in off the supply to the motors.
The electric magnetic D.C brake is mounted on the non-driving end of the motor. The cooling fan is
mounted after the brake for better cooling of the brake also. Motor connection leads and brake coil leads are
terminated in a single terminal box for easy connection. Rectifiers are fitted with motors and manual release
is provided. Normally OFF type brake also offered on request.
COMPLIES TO:
Ø IS - 325 Specification for Three Phase Motors.
Ø IS - 1231 Dimensions of Three Phase Foot Mounted Motors.
Ø IS - 2223 Dimensions of Flange Mounted AC Induction Motors.
WE CAN ALSO SUPPLY:
Ø Foot or Flange Mounted with Double side Shaft Extension.
Ø Motors are suit for customized duty cycle.
Ø Dual Voltage Motors.
Ø Thermistors.
Ø A.C Brake Motors can be given on Request.
Ø Non standard Paint Shades.
WHEN YOU ORDER, PLEASE FURNISH:
Ø Application.
Ø Mounting.
Ø Input Supply Conditions.
Ø If you are Ordering Brake Motors, Brake Coil Voltage and Brake Type.
| 
